man-machine control
英 [mæn məˈʃiːn kənˈtrəʊl]
美 [mæn məˈʃiːn kənˈtroʊl]
人机联合控制；手控-自控联合控制
双语例句
- General Evaluation on Man-machine Interface of Drilling Control Room Using Fuzzy Theory
基于模糊理论的司钻控制房人机界面的综合评价 - This machine is featured with a man-machine interface and PLC frequency control, resulting in high, high productivity, high performance and low noise.
该机采用人机界面、PLC变频调速。高速、高产量、高性能、低噪音的通用型筒倒筒络筒机。 - A design of man-machine interface in microcomputer control system for vertical sintering furnace
垂熔炉微机控制系统的人机接口设计 - Man-machine inter-facial can program logic control, pneumatic, servo motor drive, advanced sterilizing and asepsis keeping.
人机界面，可编程控制、气动、伺服电机驱动，先进的杀菌与无菌保障。 - Two-level Control Model for Human Operator in Man-machine Control Systems
人机控制系统中操纵者两级控制模型 - Control: man-machine interface control, agitation speed variable, weighing, temperature controllable, PH examination, conductivity examination, pneumatic valve, CIP and SIP.
控制：反应罐储罐的控制可实施：人机界面操作控制、变速搅拌、称重、温控、PH检测、电导检测、气动阀门、CIP和SIP。 - Man-machine interface using touch-screen control, PLC program, frequency conversion control technology have the functions of free bottles of them off cap, lack of lid shut-down.
采用了人机界面触摸屏控制，PLC程序、变频控制等技术，具有无瓶不送盖、缺盖停机等功能。 - Secondly, It gives analysis of the embedded control principle, including micro controller, peripheral bus, peripheral device. Man-machine interface of the control panel has been designed for the interaction of manipulator and the control system.
然后，论述了嵌入式控制技术原理，对微控器、外围总线、外围器件的工作原理进行了分析，并提出人机交互界面设计方案； - It can achieve man-machine conversation and instrument control.
实现了友好的人机交互和仪器控制功能。 - Virtual reality technology, exactly like modem computer one that technology establish objective environment surmount objective space-time, harmonious man-machine environment that can control can immerse as well.
虚拟现实技术，是用现代计算机技术创建的一个酷似客观环境又超越客观时空、既能沉浸又能驾驭的和谐人机环境。 - The software apply the orient-object technology, developed the man-machine interface and control program.
显控软件采用面向对象技术，进行了人机界面和控制程序的开发。 - Man-machine Interface Design of Radar Control System Based on Embedded GUI
基于嵌入式GUI雷达控制系统人机界面设计 - From computer control theory to intelligent control theory, man-machine union control theory, later to autonomous control theory. Each stage has its original characteristic. Each stage theory inherits mutually, affects mutually, communal develops in together.
从计算机控制理论到智能控制理论、人机结合控制理论，再到自主型控制理论，在每一个阶段都有其独到的特色，并且各个阶段的理论相互继承、相互影响，水乳胶溶共同发展。 - Man-Machine Cooperation Intelligent Control System for Oxidize Aluminizing Grog Sintering Process
氧化铝熟料烧成过程人机协同智能控制系统 - Where, state transition diagrams are used as the notation for specifying man-machine dialogue control, and the description for the presentation of application data is done by drawing graphics directly and defining the relationships between the control of the graphics and application data.
而对应用数据显示部分的描述则通过直接作图和定义对该图的控制同应用数据间的关系来实现。 - A new layer model including man thinker layer about NCW based on the theory of the man-machine hybrid control system is proposed. And the core command and control system of NCW is analyzed.
运用复杂混合控制系统层次结构理论，提出了突出人作用的网络中心战层次模型，分析了网络中心战的核心指挥与控制系统。 - Discussed and reviewed in this paper is the basic theory for studying human behavior in the man-machine system, including mannual control and supervisory control.
本文着重讨论和评述了人机系统研究人行为的基本理论，包括手动控制和管理控制； - The main functions of the system include as follows: signal collection, data analyses and transfers, development of man-machine interface and corresponding control of auxiliary fire-fighting equipment according to the order of the top management computer.
系统的主要功能包括：信号的采集、数据的处理、数据的传输、人机界面的开发以及根据主控微机的指令进行相应的辅助灭火设备的控制等。 - Using the adapter to join PC into the communication network of the auto-control system, man-machine interaction of the control system is friendly and the performance of the control system is promoted greatly.
利用CAN通信接口适配卡把PC机引入自动控制通信网络，人机交互功能良好，大大提高了控制系统的整体功能。 - And through man-machine conversation, different control strategies and parameters will be in operation according to different loading object while control parameters can be improved through auto-study or in manual way.
通过人机交互，能够针对不同的铲装对象及工作状况采取不同的控制策略和控制参数，还可以通过自学习或人工设定改进其控制参数。 - By studying the influential factors of compatibility indexes for man-machine display/ control interface in cock-pit and the ergonomic measurement and evaluation method of visual information flow, a study system of comprehensive ergonomic evaluation system was established.
通过对驾驶舱人机显示/控制界面适配性指标影响因素、视觉信息流工效的测定与评估方法的研究，建立了一套视觉信息流工效综合评估系统研究体系； - Values of tRC_ ( 90) obtained by calculating the open loop process with limited maximum stick deflect velocity and the man-machine close loop control process are consistent with the manned simulation results basically.
采用具有最大偏转速率限制的开环操纵过程及人&机闭环操纵过程对此两阶段分别计算后求得的t（RC90）值，与模拟试验结果比较基本相符。 - Multi-layer Modeling and Coordinative Optimization of Man-machine System in Satisfactory Control
满意控制中人机系统的分层建模与协调优化 - Man-machine System for Distributed Control Systems
分散控制系统的人机系统设计 - As the platform adopts the same configuration software as the local, that means the man-machine interface and the control logic are not need to do repetitively, shorting the construction period.
由于新型仿真平台采用和现场完全一样的人机界面软件和控制组态软件，仿真系统中的人机界面和控制逻辑完全从现场拷贝，大大缩短仿真系统的开发周期。 - Semi-physical simulation studies have shown that dynamic positioning system designed by this paper has easy operability, friendly man-machine interface and real-time control.
通过半实物仿真研究表明，本文所设计实现的动力定位系统具有易操作性、人机界面友好性和控制实时性。 - The system can set the excitation phase angle in the man-machine interface and control excitation by computer operation; it also can show test results, making the detection of the contactor phase-selection excitation and contactor bounce intelligent and visual.
该系统通过上位机的控制操作，在人机交互界面上设定激磁相角实施控制合闸，并显示检测结果，从而实现了接触器选相激磁及其触头弹跳的智能化、可视化检测。 - The robot consists of crawler mobile chassis, the vehicle stent, wireless CCD, wireless communication device, control system, GPS positioning system, power supply system, motor drive system, man-machine interface control software, voice systems and other components.
机器人主要有履带式移动底盘、车身支架、无线CCD、无线通信装置、控制系统、GPS定位系统、电源供电系统、电压转换系统、电机驱动系统、人机交互界面软件、语音系统等部分组成。 - According to these standards, puts forward the design of greenhouse electric tractors research program and the specific research content: human-computer interaction interface design and the design of man-machine control system. 3.
提出了温室电动手扶拖拉机的设计研究程序及具体的研究内容。 - Then the control system of the high voltage variable frequency variable speed device was designed, which included master control system, the upper controller, PLC controller, and industrial control system interface, man-machine interface and power unit control system and control system power supply.
然后设计了高压变频调速装置的控制系统，包括主控系统、上层控制器、PLC控制器、与工业控制系统的接口、人机界面、功率单元控制系统以及控制系统电源。